High Frequency Induction Heating Equipment
Home Induction Heater High Frequency Equipment
High Frequency Induction Heating Equipment Range Kejetherm

High Frequency Induction Heating Equipment

FREQUENCY: 10 KHz - 40 KHz Solid-State RF

MODELS: TIH-30, TIH-60, TIH-120 (30 KW - 120 KW)

DUTY CYCLE: 100% Continuous Industrial Duty Rating

Optimized high-frequency electromagnetic field penetration for bolt heads, melting of metals, pipe hot forming, and selective heat treatment of various jobs.

Enquiry Now Download PDF

SALIENT BROCHURE ADVANTAGES

  • Since heating induced, surface treatment not required.
  • Easy automation since job doesn't come in contact.
  • Clean heating, environmental friendly.
  • Quite efficient, 72% on an average.
  • Compared by heating with gas, fuel or coal, INDUCTION HEATERS work out cheaper.
  • Heat up instantly and is consistent.
  • Energy saving 10% - 25%.
  • Lesser area required as compared to other sources.

BROCHURE APPLICATIONS

Wide range of products can be heated not restricted only to:

  • Bolt heads, nuts, fasteners etc.
  • Melting of metals.
  • Soldering, Brazing.
  • Used for hot forming of pipes and tubes.
  • Heat treatment of various jobs.

APPLICATION PROCESSES

  • Heating Applications: Rapid pin, rod, and billet pre-heating.
  • Melting Applications: Small batch crucible metal melting.
  • Forging: Die blanks & bolt upsetting blanks.
  • Heat Treatment: Selective surface hardening & annealing.
Surface Hardening SPM

Looking for vertical scanning hardening SPM or custom rotary tables with quench spray jackets? Contact our Pune engineering team.

Request Hardening Consultation

Technical Specifications of Induction Heater (TIH Series)

MODEL Unit TIH-30 TIH-60 TIH-120
Supply voltage at 3 phrase. 50HZ V TIH-30415 TIH-60415 TIH-120415
Input power at max. current KW TIH-3030 TIH-6060 TIH-120120
Max. Input Current A TIH-3042 TIH-6084 TIH-120167
Oscillating Frequency KHz TIH-3010 - 40 TIH-6010 - 40 TIH-12010 - 40
Duty Cycle % TIH-30100 TIH-60100 TIH-120100
Heating Capacity & Cycle:
Range of bar heating mm TIH-30Dia 16 - 20 TIH-60Dia 20 - 30 TIH-120Dia 30 - 40
Heating Time secs. TIH-300 - 180 TIH-600 - 180 TIH-1200 - 180
Cooling Water & Dimensions:
Cooling water (control panel) L/min. at 2.5 kg / cm² TIH-3025 TIH-6040 TIH-12060
Cooling water (transformer) L/min. at 2.5 kg / cm² TIH-3025 TIH-6040 TIH-12070
Dimensions (control panel) mm (L X B X H) TIH-30365 X 500 X 790 TIH-60400 X 540 X 970 TIH-120500 X 600 X 1380
Dimensions (transformer) mm (L X B X H) TIH-30320 X 320 X 310 TIH-60410 X 470 X 385 TIH-120405 X 555 X 380
Cable cross section in copper 3 core (sq. mm) TIH-3014 TIH-6028 TIH-12056
Note : The information and illustration in this catalogue are subject to alterations due to constant endeavour to update design